How to Replace Elux ENE Legend 15K Prefilled Pods? A Step By Step Guide

How to Replace Elux ENE Legend 15K Prefilled Pods? A Step By Step Guide

Advanced technology vapes such as the Elux ENE Legend 15K Prefilled Pods have changed the meaning of convenience for today's vapers.

Rather than sticking with old-school vape technology, this advanced device gives you the chance to keep the battery power unit intact.

You just need to change the components that hold the liquid once they become empty. It is a great technology that costs you much less money and greatly reduces e-waste.

In case you are switching to this prefilled pod device, it is extremely easy to do. The following guide will show you how to change your Elux ene legend 15k review easily and safely.

Understanding Your Pod System

It is helpful to understand the modular nature of the Elux ENE Legend 15K Prefilled Pods to get the most out of it:

• The Modular Construction: The kit consists of two major modules – the reusable and rechargeable battery and the prefilled e-liquid pod. Thus, you will be able to keep the same battery unit and only change the flavor pod when needed.
  
• Automatic Activation on Inhale: The unit does not have any power buttons or triggers, as there is a built-in airflow sensor inside the hardware. As soon as you draw a breath, the battery starts heating the coil; when you stop drawing, it stops providing power.
  
• The Mesh Coil Design: The modern prefilled pods feature the mesh coil inside. It is designed in a way to provide even heat distribution among the e-liquid inside it and avoid burnt hits.

How to use Elux ENE Legend 15K Prefilled Pods

Preparing your pod kit is not something that would take more than five minutes. Here are some easy steps to ensure a perfect preparation of Elux ene legend 15k prefilled:

1 - Remove the Protective Seals

The new prefilled pods come sealed up to prevent any leakage and keep the pods fresh during transportation. Get a new pod out of the pack, and remove the rubber plug from the top end mouthpiece. The next step would be to take off the clear plastic sticker that covers the metal connector at the bottom of the pod.

2 - Fit the Pod on to the Battery Base

Holding your fully charged battery in one hand, put the other hand on your prepared pod and push it straight into the top chamber of the device. The internal magnets would align the pod and click it into position.

3 - Prime the Coil (Very Important)

When you put in a new pod, allow your pod and battery to stay idle in an upright position for 2 to 3 minutes before taking your first puff.

4 - Inhale to Activate

Place the mouthpiece in between your lips and take a smooth draw. Once again, the automatic draw-activation mechanism will kick in, activating the device without any buttons being pressed.

How to Replace Your Elux ENE Legend 15K Prefilled Pods

The Elux ENE Legend 15K is designed in a very user-friendly modular fashion. Just follow the below steps to install your new pod:

Step 1: Unscrew the Mouthpiece Cap

The outer mouthpiece in plastic material acts as a cap covering the inner pods containing e-liquid. Firmly hold the bottom part of the device using one hand, and remove the top mouthpiece by pulling it up.

Step 2: Pull Out the Used Pod

In the inner chamber of the device, you will find your used pod (or two pods according to your configuration). Just pull out the used pod from the device. No twists or screwing are required as the connection is in slip-fit type.

Step 3: Unbox and Prep Your Fresh Pod

Open your Elux ENE Legend replacement cartridge package. Be sure to peel off any protective stickers found on the base of the cartridge and remove the tiny silicone rubber stopper from the top of the mouthpiece before inserting the cartridge. Failure to do so will prevent the device from working due to obstructed airflow.

Step 4: Insert the New Pod Into the Device

Place your fresh cartridge against the device opening. Drop it in vertically into its slot. Remember that the sides of your cartridges should be facing inward towards the center of the device where the electronic contact pins can fit properly together. The internal LED light will blink shortly when the device acknowledges the new cartridge.

Step 5: Pop the Mouthpiece Back On

Align the outer mouthpiece casing against the top part of the Elux ENE Legend 15K Prefilled Pod Kits and snap it in place.

Quick Setup and Pro-Tips for the Best Experience

In order to make the most of your brand-new pod, there are several things you should be aware of prior to taking your very first vape:

• The Coil Needs to Be Primed: After inserting the new pod, allow 3 to 5 minutes of idle time. It ensures full saturation of the internal mesh coil with the e-liquid, avoiding any dry hits and maintaining the taste.
  
• The Mode Switch Should Be Set Correctly: Please do remember that the ENE Legend has a bottom switch. Move it to the left or right position to activate one of the pods, or set it in the middle position to use both internal pods at once.
  
• The Battery Should Always Be Fully Charged: An undercharged battery might cause uneven heating of the coil resulting in spit-back and flavor suppression. Charge your pod device via a regular Type-C cable each time the LED light gets out of the “green” area.

Frequently Asked Questions

Q: What is the Elux ENE Legend 15K puffs prefilled pod kit?

A: The Elux ENE Legend 15K is a high-capacity, rechargeable prefilled pod vape kit that can give up to 15,000 puffs. It functions as a bridging product that lies in between the conventional vaping gadgets and the pod devices. Unlike vape devices where the entire gadget is disposed of after the e-liquid is consumed, the only thing that changes is the internal e-liquid parts.

Q: How many puffs can I get from the ENE Legend 15K pod kit?

A: This is a high-capacity vaping device that gives you up to 15,000 puffs before it is fully used up. Please note that the number of puffs may vary depending on the depth and duration of each draw.

Q: What nicotine strength does the Elux ENE Legend 15K use?

A: The vape kit contains nicotine strength 20 mg/mL (or 2%). It employs nicotine salt, which is much quicker to be absorbed into your body and delivers smoother sensation.

Q: How is the e-liquid stored in the ENE Legend 15K?

A: The device makes use of a unique 2 ml + 10 ml combination storage method that increases puff count while meeting all regulations:

• Pod: A 2 ml prefilled pod that contains the mesh coil.
  
• Refill Bottle: This is a separate, clip-in 10 ml refill bottle used for refilling the 2 ml pod. Once plugged, the 10 ml bottle feeds and refills the 2 ml pod until all 12 ml juice is exhausted.

Q: Is the ENE Legend 15K easy for beginners?

A: Definitely, the device is very easy for beginners to use. Although it has a lot of puffs, it does not need any technical expertise at all. Here's why it works well for beginners:

• Draw-Activated: The device does not have buttons, menus, and wattage settings since you only need to inhale to vape. 
  
• Smart Screen: The device comes with a digital screen that checks your battery life and e-juice level. 
  
• Mouth-to-Lung (MTL): It provides a cigarette-like draw for the smokers who want to quit. 
  
• Rechargeable: It comes with a 1000 mAh battery that can be recharged fast using a USB-C charger.