How to Replace IVG Smart Max 10K Prefilled Pods? Step by step Guide
The world of vaping products, particularly big puff vape pens, has undergone an explosion of innovative creations. IVG Smart Max 10K Prefilled Pods provides the consumers with a more satisfying experience for a longer time compared to traditional vape devices.
Just like the complex vaping systems, the IVG Smart Max 10K Prefilled Pod Kit is notable for its capacity to offer up to 10,000 puffs of high-quality vapor legally and comfortably.
Equipped with a strong and rechargeable 1000mAh battery along with a mesh coil system, this vaping product features a double-reservoir construction that consists of a 2 ml pre-filled pod and a special 10 ml refill tank.
Understanding Your IVG Smart Max 10K Prefilled Pods Setup
The IVG Smart Max 10K eliminates the hassle of traditional open-tank systems while retaining the intense flavor of classic vapes. Here are IVG Smart Max Boost Mode instructions:
-
Drawing to Activate: There are absolutely no complicated buttons or menu options to deal with in IVG Smart Max pods. All you have to do is draw through the mouthpiece to activate the heater of IVG SMART Max change mode.
-
Patented Re-filling Method: As soon as a new 10ml bottle is inserted in place, the device will start filling the 2ml pod area with the contents automatically. No more fiddling with bottles to squeeze the contents out; just vape, and the device fills the pod itself.
- Led Battery Level Monitoring: The digital screen shows your remaining battery level right from the start, ensuring you are aware when the battery runs dry.
Instead of throwing away the entire unit when the e-liquid runs out, you keep the main rechargeable 1000mAh battery base and simply swap out the pods.
This step-by-step guide walks you through exactly IVG 2400 how to change pods, use, and maintain your device for peak performance and maximum flavor.
How to Use Your IVG Smart Max 10K Prefilled Pods?
When you open your brand-new IVG Smart Max 10K kit for the very first time, follow these steps to get it running perfectly:
Step 1: Detaching and Removing Seals
Take apart your device, and you will see the battery casing along with a 2ml pod and 10ml refill cartridge.
Important Step: Strip all the plastic seals that come attached with the device; otherwise, there will be no airflow and no power supply to the device.
Step 2: Filling the 10ml E-Liquid Bottle
Place the 10ml e-liquid cartridge into its specific location in the battery unit. Make sure to press it down till you hear the clicking sound; it will lock the e-liquid bottle in place.
Step 3: Fixing the 2ml Pod
Line the 2ml pod cartridge into the upper part then simply press it down till it locks itself through the internal magnets to the gold power pins. The LED screen will glow for confirmation of the electrical connection.
Step 4: The 60-Second Priming Principle (Absolutely Do Not Miss This Step)
After clicking all the necessary elements into place, place the device upright on a flat surface and leave it alone for one or two minutes. You do this to allow the juice to flow from the tank and fully saturate the cotton wick wrapped around the mesh coil.
When you start vaping right away, the cotton would get burned, spoiling your experience straight away.
Step 5: Draw to Start Vaping
Just after leaving it alone, place the mouthpiece between your lips and draw in a gentle stream. The draw activation sensor would instantly activate the coil and tells you How to lock IVG Smart Max.
How to Replace Your IVG Smart Max 10K Prefilled Pods
Do you know How to refill IVG Smart Max pod For situations where there is a reduction in flavor or the e-liquid supply runs out, use the following procedures for installing a fresh prefilled pod and fluid holder assembly:
Step 1: Removing Depleted Elements
-
Remove Using Both Hands: Are you aware IVG Pro how to refill? Place a firm grip on the main battery housing with one hand. Meanwhile, use the other hand to grasp the top pod/mouthpiece component and pull upward.
-
Moving Both Elements Upward at Once: The exhausted 2ml pod and 10ml liquid holder are arranged to fit into the main terminal slot as a nested assembly. By pulling them upward, the elements will be removed simultaneously from the device.
- Cleaning Inside Contact Points: Occasionally, moisture droplets or lint particles can accumulate within the battery housing interior. Use a dry piece of cloth or cotton swab to clean the surface area.
Step 2: Prepare the Fresh Replacement Pack
-
Uncap and Inspect: Begin by unsealing the newly purchased IVG Smart Max cartridge kit, which is sealed in its original packaging. Each box holds one single-use prefilled 2ml pod cartridge along with a complementary 10ml automatic refill fluid container already filled with 20mg nicotine salt liquid.
- Remove the Protection Covers: Carefully detach any protective stickers as well as rubber/silicone plugs placed over the lower and upper ends of both brand new items. If you don’t strip off the sealing films, you won’t be able to establish contact between electronic components.
Step 3: Install and Click into Place
-
Dock the Refill Container: Line up the refillable 10ml container with its intended slot rail tracks inside the main bay of the battery unit. Insert it until you hear a click that signifies successful locking.
- Click in the Pod Cartridge: Position the new prefilled 2ml pod into the remaining guide slot beside the holder. Thanks to magnets built into the design, the pod will automatically attach to the electrical contacts and the LED screen lights up, indicating an established connection.
Step 4: Wait Before You Puff
Set the vape down upright on a table and wait a full 60 to 90 seconds. Let the fresh e-liquid saturate the new mesh coil completely before taking your first puff.
The Vital 60-Second Coil Priming Rule
Once both components are locked into the battery frame, set the entire device down vertically on a flat surface and leave it completely untouched for at least 60 seconds before taking your first draw.
This brief wait is essential. It gives the integrated mesh coil and its wicking channels enough time to draw the fresh nicotine salt e-liquid from the reservoir and completely soak the cotton core. Taking a puff immediately after assembly will fire a dry coil, causing a burnt taste and permanently damaging the brand-new pod.
Pro-Level Maintenance Habits
Here are the pro level maintenance habits that you should apply while using your IVG Smart Max 10K Prefilled Pod Kits:
-
USB Type-C Fast Charging: Once you notice the LED screen indicating battery depletion, use a USB-C connector cable and plug it into the bottom charging port. Your battery capacity of 1000mAh charges quickly for minimal downtime. Be sure to remove the charger after successful completion of the charging process.
-
Vertical Positioning: Any time when you are not using the device, ensure it remains in an upright position on its flat base. This ensures gravity works in your favor by helping out the automatic refill mechanism and avoiding gurgling and obstruction in the channels.
- No Refills Please: The IVG Smart Max is only designed as a closed unit. Under no circumstances should you attempt to open the pod caps and insert vape juice bottles. It may ruin the leak-proof seal and internal electronics.
Frequently Asked Questions
Q: How many puffs does the IVG Smart Max 10K offer?
A: The system is built to deliver up to roughly 10,000 puffs per complete pod and container pack. The exact lifespan depends entirely on the duration of your individual draws, as longer, deeper puffs consume more e-liquid and battery power than shorter draws.
Q: Can I use these refill packs with other types of vape kits?
A: Absolutely not. The refill packs and pods from IVG Smart Max are specially manufactured and have an innovative design and shape. Therefore, it can be used only with the official IVG Smart Max device.
Q: Why does my device light up but fail to produce any vapor?
A: This is almost always caused by a minor connection issue inside the deck. Remove the pod assembly, verify that all protective adhesive stickers have been peeled off the bottom, and wipe the contact pins with a dry tissue. Reinsert the pod and container firmly to ensure they are seated deeply and securely inside the battery slot.
Q: When should I replace my pod pack?
A: You will understand that it is time to change the pack of pods when the amount of vapor produced is significantly reduced, the intensity of flavor is faded, or the drag is too light.
