How to Replace Lost Mary 4-in-1 Prefilled Pods? A Step By Step Guide

How to Replace Lost Mary 4-in-1 Prefilled Pods? A Step By Step Guide

Big puff vaping has certainly been stepped up to a whole new level by the introduction of the Lost Mary 4-in-1 Prefilled Pods.

This amazing product offers the perfect blend between conventional single-flavor pod systems and larger capacity equipment, capable of delivering up to 3200 puffs thanks to a multi-pod carousel system that is fully TPD compliant.

This innovative Lost Mary 4 in 1 special Edition combines the four pods together into one sleek product. It eliminates the need to lug around four separate pens or constantly have to refill the pods from open tank bottles with their contents.

Equipped with a powerful 850mAh rechargeable battery, a power screen display feature, and efficient 1.2 ohm mesh coils, you can easily change flavors or empty pods by twisting this unique device.

Once all four of your pre-filled e-liquid pods have run out, you will not be required to throw the device away. The process of inserting the next four pods into this amazing device is made simple through a few steps shown here.

How to Use Your Lost Mary 4-in-1 Prefilled Pods

This Lost Mary 4-in-1 Prefilled Pods comes with a very intelligent and intuitive design which makes daily mouth-to-lung vaping a breeze.

• Easy Auto-Draw Activations: You don’t have to press any power keys or any firing buttons; just inhale the vapor using the top mouthpiece, and you’re good to go.
  
• Change Flavors Using Twist Feature: Tired of smoking one and the same flavor each time? Twist the middle chamber or top dial section and enjoy the new flavor that gets activated via the automatic change of position of the wheel. The current flavor will be displayed through the window.
  
• Two Modes of Functionality: The user is offered two options for using this vape pen, standard mode (more punchy MTL draw with up to 2400 puffs) and eco mode (less power with up to 3200 puffs).

How to Replace Lost Mary 4-in-1 Prefilled Pods?

Installing pods on your Lost Mary 4-in-1 Prefilled Pods is special due to its use of revolving carousel design housing.

While you might be familiar with installing pods in a single-slotted vape mod, this device features a multiple-pod setup which accommodates four 2ml pods at once.

For seamless rotation, flawless electrical conductivity, and precise tracking on your OLED screen, there is a specific method involved in replacing pods.

1 - Opening the Carousel Chamber

This Lost Mary 4 in 1 prefilled pods amazon cartridge installation is quite convenient, thanks to its friction-fitted lid mechanism that doesn't require any threads or locks.

• Take Off the Mouthpiece: You will need to hold the device's bottom part using your left hand. Securely grab the top part by holding its plastic mouthpiece cover using your right hand. Lift the device's top portion vertically, making sure you are lifting directly upwards without any sideways pressure.
  
• Dont Try to Force or Twist It: While pulling, make sure not to twist or bend the cover. The device's mouthpiece acts as its cover, protecting the revolving cartridge chamber. Thus, it will simply detach from the body with a straightforward upward pull.

2 - Remove the Pod Housing & Clean the Deck

It is important to remove the used pod housing and ensure that you clean the electrical circuit paths before inserting new pods.

• Removing the Used Pods: Grasp the top sections of the four used 2 ml cartridges and extract each one individually from its slot in turn. Should they be magnetically trapped inside the slots, just a little shake will easily dislodge them.
  
• Perform the Dry Wipe (Like a Pro): Rotating high-volume devices operate on dynamic airflow and fluid passages. They may occasionally attract droplets of condensation or bits of lint in their common compartmental housing area. It is thus advisable to take a dry microfiber or a cotton bud and carefully wipe the bottom areas of all the four slots with particular attention to the golden electrical contact pin.

3 - Disassemble and Prime Your New Refills

Each new replacement pod comes with high-grade nic salt refills at 20 mg. The Lost Mary 4 in 1 Replacement Pods come vacuum-sealed to ensure maximum flavor purity before use.

• Open the Replacement Pod Box: Get your replacement pack of Lost Mary 4-in-1 pods. You have the option to purchase either the same flavor for each pod or various flavors for the complete variety wheel setup in a collection of pods. The total number of puffs that you can get per pod is 800. This will add up to a maximum of 3,200 puffs per entire pod setup.
  
• Remove the Transit Seals: Every new replacement pod comes with an air flow seal, in the form of a small rubber stopper fitted inside the chimney. Additionally, the base plates of each new pod are protected by a sticker seal to prevent any damage on transit. Both of these have to be removed prior to use, otherwise, the rubber stoppers would fully obstruct the air flow. This makes it impossible to draw and the sticker seals would isolate the electrical current, thus rendering the device unresponsive.

4 - Load, Snap, and Reassemble

The reassembly of the vaping device will reconnect the structural elements and create a complete seal for the draw activation mechanism.

• Orientation: Grasp one of your ready pods and examine the Lost Mary brand logo that will be stamped on it. Insert the pod vertically into any of the open slots making sure the Lost Mary logo faces downwards. When the pod reaches the bottom of the slot, it will be automatically pulled by the magnetized structure creating a secure connection with a snap sound. Complete the same procedure with all four slots to fully load the carousel.
  
• Snap the Top Lid into Place: Grab the top mouthpiece cover made of plastic. Position it according to the bottom part of the cartridge with the top edge of the battery assembly. Push it downwards hearing and feeling a distinctive "click" sound indicating a proper lock.

The All-important One-Minute Priming Time

After clicking the mouthpiece cover securely into place on top of the mod. It allows the whole apparatus to rest for 60 seconds undisturbed in its upright position before pulling your first puff.

• Reasons for importance: With high-performance 1.2ohm mesh coils contained within the pods, there is great sensitivity. While handling the Lost Mary 4 in 1 Refill Pods in preparation for use, some displacement of the e-liquid from within the atomizer can occur.

Allowing one minute of time for the equipment to be still will ensure that the dense nicotine salt formula fully saturates the cotton within the atomizers through pure gravity.

Firing immediately could result in a dried coil being engaged, burning the cotton and ruining the flavor experience of your pristine new pod right out of the gate!

The Closing Thoughts

The Lost Mary 4-in-1 Prefilled Pod Kits provides a better and far more economical option for vape bar smoking compared to conventional ones.

By offering complete freedom to experience four of the Lost mary 4 in 1 prefilled pods flavours, this takes the vaping experience to another level.

Make sure to wipe your bays clean, take off the rubber transit bungs when loading and puff up to 3200 times!

Frequently Asked Questions

Q: Are Lost Mary 4-in-1 Pods prefilled or refillable?

A: The Lost Mary 4-in-1 pods are entirely prefilled, closed cartridge system that cannot be filled. The product comes with a certain amount of e-liquid inside and must be changed once depleted to maintain its flavor profile and proper functioning.

Q: Are these pods compatible with other vape kits?

A: Unfortunately, no. These specially designed cartridges fit only into Lost Mary 4-in-1 vape carousel chamber. But, on a positive note, the Lost Mary device housing is reverse-compatible with Elf Bar 4-in-1 prefilled pods.

Q: Do I have to load all four pods into the device at the exact same time?

A: Not necessarily; you are not compelled to insert four pods at the same time if you don't like the idea. While it is possible to use only one, two, or three pods in the device, doing so at the same time gives you maximum convenience since you'll achieve the maximum 3200 puffs before opening up the device to reload.

Q: How do I know when a single pod is fully empty?

A: You will see reduced vapor generation and faded or lightened flavor delivery. At such a point, simply turn the mouthpiece by twisting to advance the carousel to the new chamber. Alternatively, you can observe the level of e-liquid through the side window of the device.

Q: How do I charge the Lost Mary 4-in-1 Kit?

A: Plug a standard USB Type-C charging cable into the charging port of the device. An OLED display screen will automatically light up to indicate the battery level in real-time. Once the battery is charged, the indicator turns green. It takes about 45-60 minutes to recharge the battery fully.