How to Replace RELX Maxgo Combo 33K Prefilled Pods: A Step-by-Step Guide
There is a clear trend amongst high volume vaping kits where they are moving from traditional single-unit kits to intelligent, modular devices.
The best example is RELX Maxgo Combo 33K Prefilled Pods which consists of a reusable power base and a dual-pod system that provides up to 33,000 puffs.
Since this vaping system makes use of a multi-component system to store its vast amounts of e-liquid, replacing depleted components may require some effort.
However, this simple Relx maxgo combo 33k review will show you the workings of the device and how you can replace your prefilled pods and refills easily.
Understanding the RELX Maxgo Combo 33K Architecture
Before we get to the replacement process and Maxgo 33K price, let’s know something else. It is important that you learn about the different components of this high volume kit and how they work together:
-
The Reusable Power Base: This unit contains a rechargeable 850mAh battery which powers the kit to deliver up to 25 watts. Relx maxgo combo 33k manual also features a built-in LED display screen that tracks the battery and e-liquid levels.
-
The Dual Flavor Pod Bay: This MAXGO 33K flavours stores two 2ml prefilled pods at once. It has a built-in switch system for changing between two different flavors immediately without removing any components.
- The Auto-Refill Containers: Nestled around the pods, there are two 10ml refillable containers (for a combined capacity of 24ml). These containers boast an automatic anti-leak system which constantly fills the 2ml pods with e-liquid, keeping the 1.0Ω dual mesh coils saturated at all times.
How to use RELX Maxgo Combo 33K Prefilled Pods
When unpacking your new RELX Maxgo Combo 33K kit, or when assembling a brand-new setup from scratch, follow these preliminary steps to put together the device safely:
1 - Remove All Protective Seals and Packaging
Take the device, the 2ml prefilled pods, and the 10ml refill containers out of the box. Locate and peel off any clear plastic transit stickers covering the metal connection pins on the bottom of the pods and containers. Pull out the protective silicone safety plugs from the mouthpieces of Maxgo 33K refill.
Important: If you leave these factory transit seals attached, the device will not be able to read the pods or pull airflow, which prevents it from firing.
2 - Install the Refill Containers and Pods
Insert the 10ml refillable containers in the corresponding slots in the device’s chamber and make sure they are secured in place. Then install the 2ml pre-filled pods directly into the pod bay. Magnets will attach the components to the gold-plated electrical connections. The LED display lights up once the installation is completed successfully.
3 - Prime the Mesh Coils (The 10-Minute Rule)
Because this setup utilizes an auto-refill system, you must allow the e-liquid from the containers to fully saturate the internal dual mesh coils before taking your first puff. Stand the fully assembled device upright on a flat surface and leave it completely untouched for 10 to 15 minutes.
Warning: Drawing from the vape immediately without a proper priming period will dry-burn the internal cotton, permanently ruining the flavor of your brand-new pod.
How to Replace Your RELX Maxgo Combo 33K Prefilled Pods
When your LED screen indicates that your e-liquid is empty, your vapor clouds thin out, or the flavor starts to drop. Just follow this routine to refresh your kit:
Step 1: Remove the Depleted Pods or Containers
Hold the main battery body firmly in one hand. Grip the top of the empty 2ml pod or the base of the depleted 10ml container and pull straight up and out. The magnetic hold will release, allowing you to lift the empty plastic components free from the housing.
Step 2: Clean the Docking Terminals
Take a quick look inside the empty chambers of the battery base. Over days of heavy use, minor condensation or tiny drops of moisture can settle around the gold connection pins. Using a clean and dry cotton swab or a paper towel, you can thoroughly wipe the inner base to ensure proper electrical connectivity.
Step 3: Prepare the Fresh Replacements
Open your new RELX Maxgo Combo 33K Prefilled Pods or refill containers. Check to see if all the bottom plastic tapes, safety seals, and silicone caps have been removed.
Step 4: Seat the New Components
Put the new containers and pods into the right place, and let the magnets push them down to the bottom of the device. Check the display to make sure that the new parts have been recognized by the device.
Step 5: Wait for Auto-Refill Saturation
After assembling the device, put it upright and wait for 10-15 minutes while the liquid fills the pods. When the waiting period ends, simply breathe in to start using the draw-firing system of RELX Maxgo Combo 33K Prefilled Pod Kit.
Practical Tips for Longevity and Performance
Do you know Relx maxgo combo 33k price? It’s affordable, trust me it is! Here are some simple maintenance techniques to ensure that your power base is in top condition and not causing any burnt taste:
-
Keep the Device Vertical: Always use and place your Relx maxgo combo 33k near me in an upright position. By doing so, you ensure that the level of the e-liquid remains constant within the auto-refill holes and there is no uneven wicking in the two mesh coils.
-
Charge with Care: The Relx maxgo combo 33k battery 850mA charges really fast through its Type-C USB charging port. Look at the battery level display on the front and make sure that you stop charging it when it reaches 100%.
- Do Not Force Refilling Manually: This kit is created only as a completely closed pod system that is fully tamper-proof and TPD compliant. Under no circumstances should you force open the plastic pods and refill the tanks manually with third-party e-liquids.
Frequently Asked Questions
Q: How many puffs does the device provide?
A: The RELX Maxgo Combo 33K is a product with an exceptional lifespan of 33,000 puffs. It is powered by the long-lasting battery and modular pod system, users will have access to a prolonged use that surpasses the capabilities of regular vape devices. Of course, the overall lifetime of the unit will depend on individual vaping habits including puff duration and strength.
Q: What is the total e-liquid capacity?
A: The device offers a total e-liquid reservoir of 24ml. To combine convenience and regulations, the capacity of the product consists of multiple parts:
- Dual Prefilled Pods: The device has two 2ml prefilled pods in the active bay (total of 4ml).
- Auto-Refill Containers: Two 10ml containers feed the active pods with e-liquid (total of 20ml).
Q: What nicotine strength do the pods contain?
A: Both prefilled pods contain 1.8% to 2% (18mg/ml to 20mg/ml) of nicotine salt solution. Salts of nicotine are used since they ensure smooth experience and quick absorption at higher concentrations.
Q: How does the dual-flavor switching feature work?
A: The design is specially made to accommodate two independent pods in the single unit simultaneously. Within the body of the vape device, each pod has its own e-liquid path and independent airflow. There is a special built-in electrical circuit that will connect to one pod at a time while the battery is providing the energy. So you won’t mix anything up, and your flavors will stay clean all the time.
Q: How do I switch between the two flavors?
A: The switching process is easy and fast. You don’t have to remove any pods to change your flavors or even turn off the battery – everything is happening right there in the body of the device. It has a physical rotating mechanism that allows you to switch the flow of battery energy and airflow between your two pods in seconds.
