How To Replace Your HQD Glow Air 70K Prefilled Pods? A Step By Step Guide
The HQD Glow Air 70K Prefilled Pods has revolutionized the world of puff-intensive vaping in the UK.
Featuring an outstanding capacity of up to 70,000 puffs, an intelligent OLED display, and a one-of-a-kind dual flavor switching system, it guarantees a long life span being fully compliant with TPD requirements.
HQD Glow Air 70k for sale has revolutionary 4-in-1 concept, which consists in dividing 44 ml of e-liquid into prefilled pods and refillable pods. You need to know to assemble and change the parts becomes crucial.
In this guide, you'll learn how to change the Hqd glow air 70k review in the most effective way possible.
Understanding the HQD Glow Air 70K Pod Anatomy
Before changing any components, it will be wise to know how this unique Hqd glow air 70k kit is constructed. Each complete set of HQD Glow Air 70K Prefilled Pods comprises:
-
Battery Base: A reusable battery with a capacity of 850mAh. This component has the OLED display screen and the flavor slider switch that is found at the base.
-
2 x 2 mL prefilled pods: Here the two mesh heating coils and the main whistle tip mouthpiece are stored.
- 4 x 10 mL automatic refill containers: The refills are inserted into the pod housing and constantly supply the coils with e-liquid.
Due to the fact that this HQD 70K has a dual flavor, its pod construction is divided into two parts. Hqd glow air 70k coils allow vaping two flavors at once.
How to Use the HQD Glow Air 70K Prefilled Pods
Proper handling of the device will allow getting the maximum performance from the e-liquid and preserving its flavor quality. Check out this easy guide for assembling your machine.
1. Initial Setup and Unpacking
-
Removal of Seals: Open the packages containing each component. Remove the silicone dust cap from the main whistle-tip mouthpiece and peel off the protective films present in the bottom parts of both the battery and 10 mL refill bottles.
- Mounting of the Pod: Position your 10 mL e-liquid refills into the slots located at the sides of the main pod and push them straight upwards.
2. Priming the Coils (Preventing Burnt Hits)
-
Dispersal of E-Liquid: After the 10 mL bottles have been inserted into the pod, tilt the entire assembly up and shake it a couple of times.
- Holding Until Soaked: Wait for about 2 to 3 minutes while the attached pod is kept in a horizontal position to allow full saturation of cotton coils by e-liquid.
3. Activating the Device
-
Mount the Pod: Insert the assembled pod into the magnetic holder on top of the 850mAh battery base. The magnets will hold it securely in place, and the screen will light up for a brief moment.
-
Unlock the Pocket Lock: The pocket lock is built into the design of the device. Press the power button three times rapidly to unlock the battery and see your battery levels and settings on the OLED screen.
- Inhale to Vape: Put your lips around the mouthpiece and inhale steadily. The sensor detects the airflow and activates the heating mechanism without pressing any buttons.
How to Replace your HQD Glow Air 70K Prefilled Pods
Unlike, Hqd glow air 70k price is affordable and this is what makes it convenient. Here is the replacement process of HQD Glow Air 70K near me:
Step 1: Remove the Old Pod Assembly
Hold the transparent pod housing steadily and pull it upwards from the anodized aluminium battery base. There is no need to be alarmed because there is a magnetic connection, meaning that all it takes is a strong but calm pulling motion to remove the two parts successfully.
If you are getting rid of used-up pods and 10 mL refills that have been used up, you will be able to remove them separately.
Step 2: Unpack and Prepare Your New Components
Unpack your new packages containing HQD Glow Air pods and refills.
- Unwrap any plastic film.
- Unscrew the silicon protective caps on the pods' mouthpieces.
- Take off the safety labels from the bottoms of 10 mL refill bottles.
Note: Keeping safety labels and silicon caps attached to your components will prevent air circulation and the flow of e-liquid to the coils.
Step 3: Insert the Refill Containers into the Pod
Next, arrange your 10 mL refills in the correct slots in the pods. Since the device offers the possibility of mixing two flavors at once, you must pay attention to the labels (Left/Right) so that the flavor matches the pod compartment you want to fill.
Step 4: Prime the Mesh Coils (Crucial Step)
In order to prevent the brand-new cotton inside your dual mesh coils from being burnt, you need to prime the setup:
- Position the new pod vertically.
- Gently shake the pod 3-5 times.
- Check the transparent pod body and watch the small air bubbles appearing. It means that the e-liquid flows from 10 mL container into 2 mL coil chamber and moistens the wick.
Since the device needs to be saturated, wait for 2-3 minutes before your first inhale.
Step 5: Click the Pod into the Battery Base
Position the pod construction over the magnetic port at the top of the 850mAh battery base. Insert it till you feel and hear a click sound. The internal smart chip will detect the connection immediately and turn on the OLED screen.
Step 6: Unlock and Test Your Vape
As a safeguard to keep your pockets safe, the vape comes with a safety lock.
- You can unlock the vape by triple-clicking the power button.
- The OLED screen will come alive to show you the battery level, active side of the pod, and puffs taken.
- Breathe in gently to see how the vape senses the draw and activates itself automatically.
Pro-Tips for Peak Performance
HQD Vape price is something that makes it a better option. Here are the pro tips for the best performance:
-
Check the Toggle Switch: When you change your pods, but you notice one side is not working or tastes differently. While using HQD Glow Air 70K Prefilled Pod Kits, make sure to check the toggle switch which is located at the bottom part of the unit. Slide the switch all the way to the left or right side based on which flavor chamber you would like to vape from.
-
E-Liquid Monitoring: Do not let your pods run out of e-liquid before changing them. Monitor the level of e-liquid through the window or indicator on the screen to avoid dry hits that will damage the taste of the coil.
- Clean Connections: Every now and then clean the gold magnetic connections at the top part of the battery base using a cotton swab.
Frequently Asked Questions:
Q: How many puffs does the HQD Glow air 70k last?
A: It offers a maximum of 70,000 puffs because it combines the device’s internal parts with a vast amount of e-liquid. Such longevity is made possible due to the fact that it uses only one prefilled pod and four 10ml refill bottles.
Q: Is the HQD Glow air 70k rechargeable?
A: Yes, the device utilizes a rechargeable battery that is built into the main body of the vaping device and is intended for every day usage. You can easily recharge the battery of the HQD Glow air 70k via the USB Type-C charging port on its bottom.
Q: Is the HQD Glow air 70k a regular vape?
A: No, it functions as a prefilled pod system and not as a typical vape. It means that instead of disposing of the whole unit once you run out of the liquid, you have to recharge the base of the device and replace the spent pods with new ones.
Q: How do I switch flavor on the HQD Glow air 70k?
A: You can change flavors via the physical slider switch on the lower side of the base unit battery. By clicking the switch to the left, you will activate the left internal mesh coil, whereas, switching to the right will switch the circuitry for firing the right pod.
Q: Is the HQD Glow air 70k TPD-Compliant in the uk?
A: Yes, this product is totally legal and complies with all UK regulations related to vaping. Even if it is characterized by great capacity, it is totally TPD-compliant because it features a compliant 2ml prefilled pod capacity on the firing deck and separate compartments.
Q: How many flavors does the HQD Glow air 70k come in?
A: It is specifically designed for multi-flavored and two-flavored use. Thus, you may use different flavor cartridges with the single device. The total number of flavors on the UK market is dependent on current stock of retailers.
