How to replace your JNR P4 Stellarc 100K Prefilled Pods: A Step By Step Guide

How to replace your JNR P4 Stellarc 100K Prefilled Pods: Step by Step Guide

There is a lot of evolution in the vaping community, but the latest JNR P4 Stellarc 100K Prefilled Pods shows that it is not just about making small changes in design. It is about make the vape device long-lasting.

If you are bored of portable vapes that run out of e-juice at the most inconvenient moment, then you should definitely try the JNR P4 Stellarc 100K Prefilled Pod Kit.

JNR Stellarc price makes it budget friendly and it has convenient vape-like design and intelligent modular structure. This Jnr p4 stellarc 100k prefilled pod review provides you with an extremely long lifespan, complying with all regulations of the UK government.

Understanding the Pod Structure

In order to use this JNR P4 Stellarc 100K Prefilled Pods more efficiently, it would be better for you to understand how its high capacity is engineered.

In contrast to conventional vaping devices, the JNR P4 Stellarc features a specific modular structure that combines both fluid delivery and regulation.

• The Core Pod: It is a TPD-compliant 2ml pod that contains a 1.2Ω advanced dual mesh coil. The JNR Stellarc Pod refill mesh structure increases the heating surface, thus ensuring the same flavor through all of the inhalations.
  
• The Auto-Feed Reservoir: A 10ml refill tank locks onto the core pod. It serves as an automatic reservoir that fills the core chamber with e-liquid while vaping and thus eliminates any manual liquid drops.
  
• Dual-Flavor Independence: There is a possibility to have two pod structures at once. Thus, you can easily switch to another flavor profile without having to do anything except pressing a button.

How to Use your JNR P4 Stellarc 100K Prefilled Pods

Properly setting up your new device allows you to vape without any dirty flavors and avoid damaging the internal coil by mistake. You need to follow these simple guidelines in order to build your device:

Step 1: Disassemble the Kit

Take your package and unpack all the single parts from the outer box. Lay down the battery base, pod chambers and bottles with e-liquid on the table.

Step 2: Assemble the Auto Feed Device

Find the 10ml auto feed refillable reservoir and 2ml core pod chamber. Line up the triangles at the sides of the pieces and gently insert one piece into another until they click.

Step 3: Open Safety Seals

Turn your pod upside down and remove the transparent seal from the bottom part. It’s necessary to expose metal magnetic contacts for the battery to power the pod.

Step 4: Attach the Pod to the Base

Slide the entire pod assembly into the housing of the 1200mAh main battery. Thanks to the magnetic force, you should feel a strong click when the pod is securely in place.

Step 5: Refill the Pod and Prime the Coil (The 5 Minute Rule)

Remove the silicone rubber seal located at the side fill port. Then use the nozzle of your 10ml JNR e-liquid refill bottle and fill up the pod. Once done, close the pod firmly with the rubber seal.

Step 6: Start Vaping

You don't need to spend a lot of time on setting up the menu or pressing certain buttons. Just put your lips on the mouthpiece and inhale slowly, and the sensor of airflow will turn it on and provide you with flavorful vapor.

How To Replace your JNR P4 Stellarc 100K Prefilled Pods

Since this device is made based on modular design, you do not need to dispose of the whole system once the liquid finishes off or the coil becomes old. JNR P4 stellarc 100k prefilled pod price is affordable and and that’s why it is a perfect pod.  So, this is how you should go about your replacement process:

Step 1: When a Part Requires Replacement

It will become obvious that you have to replace the components once you observe one of these clear signs of malfunction:

• Burnt Flavor: In case your vapor starts tasting bitter or burned, it means that the cotton in the coil has dried up or become obsolete.
  
• Dull Flavors or Lack of Vapor: Once you feel that your preferred flavors have lost their strength and the device produces very little or no vapor at all, this is the sign that the level of your e-liquid is low.
  
• Screen Indicators: Always monitor your curved LED screen. Once your battery or liquid levels reach zero, it is time for a change.

Step 2: Removing the Old Pod

• Place your fingers firmly onto the side portions of the upper pod portion.
  
• Raise your hands steadily upwards to disengage the magnetic locking mechanism and remove the pod from the 1200mAh battery.
  
• If you need to dispose of the old pod, lay it aside for recycling according to your local guidelines for electronic waste.

Step 3: Prepping and Installing the Fresh Module

• Pick up your replacement pod and unpack it thoroughly from the blister pack.
  
• Make sure that you peel the clear protective films and safety stickers from the metal pins of the new pod.
  
• Align the pod with the top portion of your existing battery.
  
• Press the pod downwards until it is locked magnetically into the device.

Step 4: Refilling and Re-Priming

• Remove the cover of the silicone fill port of the pod.
  
• Refill the pod with your JNR liquid bottle.
  
• Perform the waiting period of 5 minutes again; do not omit this phase after replacing the pod module, since dry cotton will burn instantly when fired dry.
  
• Do a couple of soft puffs to draw the liquid into the system.

Step 5: Recharging the Battery Base

If your battery power level decreases and the animation screen notifies you about that, you don't have to change the device body.

• Insert a regular USB Type-C cable into the port where you usually insert the pods.
  
• Connect the other end of the cable to the power source. For example, you can use the port of your laptop or wall adapter.
  
• The LED screen will light up and tell you about the charging process. It takes 45-60 minutes for your battery to reach full 100%. Afterward, take out the cable to keep the batteries healthy.

Pro-Level Maintenance Tips

Here are some simple steps to keep your JNR P4 Stellarc 100K Prefilled Pod Kits working properly and prolong your hardware life span:

• Maintain Contact Points: From time to time, disconnect the pod from the battery and wipe the contact points inside the base clean from moisture and dust. 
  
• Keep Upright: Always put your device in the upright position when it's not in use. It helps keep the automatic feeder mechanism in balance. 
  
• Avoid Chain Vaping: It allows you to give some gap between two successive puffs. This saves the dual mesh coils from overheating and allows the cotton wick to have enough time to be replenished with the e-juice.
  
• Charging Safely: You should always charge using the given Type-C charging cable, and should not leave the vape plugged in for the entire night. Unplugging the kit when it is fully charged helps you maintain the health of the battery inside for a long time.

Frequently Asked Questions

Q: How long does the JNR P4 Stellarc 100K last with regular use?

A: Even though the vaporizer is designed to serve up to 100,000 puffs, the service life varies based on the way you use it. With normal usage, the high-performance fluid storage capacity of the vape will serve you much longer than other regular devices. But if you inhale more frequently or for longer periods, it is quite natural for you to finish off the battery power and e-liquid faster.

Q: When should the pod be replaced in the JNR P4 Stellarc 100K?

A: It is time to replace your pod if you experience a downgrade in the quality of your vaping. There are two major things to watch out for:

• Flavor Quality: When you start tasting the liquid with the muted flavor or it starts tasting burnt, you need a new pod to enjoy clean flavors.
  
• Liquid Levels: Your device comes equipped with an intelligent screen which will let you know the exact level of your e-liquid so you always refill your container before it is completely empty.

Q: Can different flavors be used in the same JNR P4 Stellarc 100K device?

A: Yes, it is. The device offers "Dual Flavor" technology to allow users to switch between pod profiles and thus avoid flavor fatigue.

Q: Is 5% nicotine strength in the JNR P4 Stellarc 100K too much for beginners?

A: 5% (50mg) nicotine level gives an extreme throat hit and a fast effect of nicotine. For the people that are not familiar with the process of vaping and have no experience in using high nicotine levels, this amount may seem too much. For beginners, it is preferable to use a lower nicotine level because it will let you appreciate the taste and the vaping process itself.