How to Replace Hayati Pro Ultra Plus 25k Prefilled Pods? Step by step Guide
The Hayati Pro Ultra Plus 25k Prefilled Pods has become the go-to choice in the big-puff vaping world. It addresses a huge problem for vaporizers: enjoying many puffs without flouting the UK TPD laws.
It achieves this through its cutting-edge design, which consists of a prefilled dual pod of 2ml capacity and two refill tanks of 10ml each. The result is a mind-blowing 25,000 puffs per charge of the rechargeable 850mAh battery base.
The best part is the Dual-Flavor System. A mere turn of the mouthpiece allows you to alternate between two flavors during one session. However, if you have to replace your device's prefilled pods with another fresh pack, here's your guide to do it like a pro.
How to Use Your Hayati Pro Ultra Plus 25K Prefilled Pods
The Hayati Pro Ultra Plus 25000 is designed with a premium, high-tech interface, but its core function is delightfully straightforward.
-
Smart Draw-Activation: No physical firing buttons to worry about. The internal sensor detects your draw instantly for a smooth, immediate puff.
-
Twist Mechanism: In order to switch up your flavors, there’s no need to disassemble the entire unit. Simply twist or rotate the mouthpiece to select between the two inner flavor tanks.
-
Hands-Free Automatic Refill: The 2ml pod section will automatically take fluid from both of the 10ml refill chambers; thus, your device will take care of the refills for you.
- Advanced Digital Screen: Pay close attention to the digital display screen. Your device will show you battery level, puff counters, and which tank currently holds the selected.
How to Replace Your Hayati Pro Ultra Plus 25K Prefilled Pods
Replacing the cartridge on the Hayati Pro Ultra Plus 25K is a slightly more sophisticated process than your average vape pen. This system incorporates a multi-tank setup combining a 2ml vaping chamber with dual 10ml auto-refill reservoirs.
So, proper alignment is essential to ensure the automatic e-liquid feeding and smart digital tracking function flawlessly. Do you know Hayati Pro Ultra Plus how to refill?
1 - Detach the Spent Cartridge
When your e-liquid is fully depleted, or you notice a sharp drop in vapor density and flavor clarity, it’s time to remove the old pod.
-
The Straight, Direct Pull: Grip the lower section of the rubberized 850mAh battery base firmly with one hand. With your other hand, get a secure hold on the upper pod casing (just below the twist mouthpiece). Pull the two halves directly away from each other in a straight, upward motion. Do not twist or torque the device while pulling, as this can stress the internal tracking pins. The high-tension magnetic locks will release cleanly.
- Clean the Contact Deck (The "Pro" Habit): High-capacity auto-refill systems are brilliant, but the movement of e-liquid inside the chassis can occasionally cause microscopic droplets of condensation or pocket lint to collect on the deck. Before reaching for your fresh pod, take a dry microfiber cloth or a clean cotton swab and gently wipe down the gold-plated connection pins inside the battery receiver. Dry pins prevent your digital display screen from showing incorrect information while ensuring that your unit responds instantly at the touch of a button when inhaled.
2 - Prep Your New Dual-Flavor 25K Pod
The replacement pods are tightly sealed at the factory to preserve the 20mg nicotine salt profile and prevent leaking during transit. Preparing the pod correctly protects the built-in dual mesh coils.
-
Unpack the External Foil: Open the sealed foil packet and retrieve the new pod module. Take a moment to examine the outer plastic shell.
-
Clearing the Path: Look for the silicone plug located inside the twist mouthpiece area. Pull the plug straight out and dispose of it. This silicone stopper serves as a structural cork to keep the internal chimneys airtight during shipping. If you leave it inside, the airflow will be entirely blocked, and attempting to draw on the device will create a vacuum that can flood the coils.
-
Remove the Base Film (The Missing Link): Flip the entire pod structure upside down. You will see a clear, protective safety film covering the metallic contact plates and airflow intake holes on the bottom. Peel this film off entirely.
- Crucial Note: This sticker acts as a complete electrical insulator. If you forget to remove it, the battery base cannot send power to the mesh coils, your smart chip won’t detect the cartridge, and your device will either remain completely dark or display an error code.
3 - Lock, Click, and Verify
This is where the modular engineering of the Hayati Pro Ultra plus really shines. Hayati Pro Ultra Plus 25k Prefilled Pod Kits seamlessly combines the hardware components back together.
-
Slide and Align: Lower the new prefilled pod housing directly onto the terminal slot. The battery’s internal walls are designed with precise moldings of alignment grooves which fit with the pod housing perfectly. You don’t have to jam it or twist it, as the cartridge will naturally glide into place.
- Hear the Click: As the Hayati Pro Ultra 25000 Refill Pods reaches the bottom of the deck, the powerful magnets inside take control. It pulls the cartridge all the way down and locking it into place with an unmistakable “click.” It is imperative that you check whether the cartridge is completely aligned on the battery base without any misalignments. An air tight seal is essential for the sensor to detect the air flow.
- The Digital Screen Test: Once the pod clicks into place, turn your attention to the digital LCD screen on the battery side. If the pod is attached successfully, the screen will light up immediately. It will cycle through a brief initialization before displaying your current battery percentage, your puff count tracking, and the active status indicators for your dual flavor tanks.
4 - The Non-Negotiable 5-Minute Primer
Once your screen confirms a successful connection, set the device down vertically on a flat surface and leave it completely untouched for 3 to 5 minutes.
- Why this is critical: Because the Hayati Pro Ultra Plus utilizes advanced dual-tank architecture with independent mesh coils, the thick nicotine salt e-liquid needs an undisturbed window to flow from the internal refill reservoirs down into the wicking matrix. Taking a draw too early will fire a dry or partially dry coil. This instantly singes the cotton wicking material, resulting in a permanent burnt taste. It will ruin the premium flavor profile of your brand-new 25,000-puff pod before you even get started. A five-minute wait guarantees a flawless, incredibly rich first puff!
Pro-Level Maintenance & Habits
-
The 5-Minute Saturation Rule: Do not vape the Hayati Pro Ultra Plus Pods Amazon immediately after snapping in a new pod. Set it upright on a flat surface for 3 to 5 minutes. Because the device uses dual independent mesh coils, the thick 20mg nic salt needs a few minutes to fully soak into the cotton matrix. Vaping too early will permanently burn the wicking material.
-
Intelligent Battery Charging: The 850mAh pure cobalt battery charges rapidly via USB-C. To extend the overall life of the internal cells, avoid leaving the vape plugged in overnight or using high-voltage laptop/tablet chargers. Unplug it once the display hits 100%.
- Keep it upright: Always keep your Hayati Pro Ultra Plus upright when it’s not in use. This allows the automatic refilling system to feed the e-liquid downward evenly, keeping your dual mesh coils perfectly submerged.
The Closing Thoughts
In terms of modernity, compliance, and eco-friendliness, Hayati Pro Ultra Plus 25k is a marvel of pod vaping technology. It is one of those pod devices that eliminate the hassle associated with waste generation from the use of vapes.
Not only does it offer a high-quality vaping experience without any wastage, but its flavor switching mechanism is truly amazing. So, just make sure to clear your safety seals and magnetic contacts and allow sufficient time for an optimal leak.
Frequently Asked Questions
Q: How many puffs do the Hayati Pro Ultra Plus 25K Pods actually provide?
A: Each replacement pod pack is engineered to provide up to 25,000 puffs. Your exact lifespan will vary slightly depending on how long and deep your personal drawing style is.
Q: Are these pods legally compliant in the UK?
A: Yes. The Hayati Pro Ultra Plus is fully TPD-compliant and ban-proof. It meets all UK regulations by utilizing a clever 2ml pod paired with dual 10ml closed refill tanks, staying completely within legal frameworks while delivering a massive puff count.
Q: Can I fill these pods with my own e-liquid?
A: No. These pods have been developed to be a closed system with prefilled pods. In order to avoid leakage and ensure flavor stability, Hayati Pro Ultra Plus pods feature pre-filled pods with premium nicotine salt juice. When empty, just insert a replacement pod.
Q: What is the benefit of the Dual Mesh Coils?
A: Hayati Pro Ultra Plus features dual mesh coils for different flavors of pods. The larger surface area heated by the mesh design ensures up to 35% more flavorful and rich Mouth-to-Lung (MTL) experience from the first hit to the last puff.
