How to Replace IVG Pro 12 Prefilled Pods? A Step-by-Step Guide
The IVG Pro 12 Prefilled Pods has redefined the "Big Puff" category, offering an incredible 10,000 puffs from a single setup.
However, unlike standard pods that you just snap in and go, the IVG Pro 12 uses a unique 12ml hybrid system (a 2ml prefilled pod paired with a 10ml refill container).
If you want to avoid a burnt coil and ensure you get all 10,000 puffs, you need to follow a specific installation process.
This guide provides the exact blueprint for setting up and replacing your IVG Pro 12 review like a pro.
How does the IVG Pro 12 Prefilled Pods System Work?
The IVG Pro pods are a TPD-compliant hybrid device. Rather than having a single massive chamber, it divides the liquid into:
- The 2ml Pod: This is the component that holds the integrated mesh coil which you puff on.
- The 10ml Refill Container: This functions as an outside tank that refills the 2ml pod automatically while vaping.
Together, they offer 12ml of e-juice equivalent to 16 regular vapes.
How to use your IVG Pro 12 Prefilled Pods (First-Time Setup)
IVG Pro 12 price is budget friendly and here is how we can use these prefilled pods.
Step 1: The "Freshness" Prep
Prior to attaching any element to the battery, there's a specific method for preparing the individual components.
- The Pod: Detach the silicone bung from the mouth end and peel off the base sticker.
- The 10ml Container: Unscrew the lid from the 10ml refilling bottle. Make sure not to throw it away since that is your source of e-liquid.
Step 2: Activating the Hybrid System
This is probably the most crucial part of the entire procedure. You have to assemble the pod and the bottle first prior to putting it together to your vaping device.
-
Installing the Bottle: Insert the 10ml bottle to the respective slot in the device.
- Locking the Pod: Position the 2ml pod over the bottle by applying downward pressure until you hear a distinct click sound. In doing so, you puncture the seal of the 10ml bottle and allow liquid to pass through.
Step 3: The 10-Minute "Golden Rule" of Priming
Because the liquid has just been released from the 10ml bottle into the 2ml pod, the coil is still dry.
- The Wait: Set the device aside for 10 full minutes.
- The Risk: If you vape immediately, you will burn the mesh coil. Since the coil is built-in, a burnt wick means the entire 12ml setup is ruined. Patience here saves your money!
Step 4: Power Up and Vape
Once the 10 minutes are up, the mesh coil is fully saturated. The IVG Pro 12 is inhale-activated, so simply take a gentle draw to begin.
How to Replace Your IVG Pro 12 Pods
When the flavor starts to fade or you see that the 10ml container is empty, it’s time for a swap.
Step 1: Unpackaging & Cleaning
Unpack the 2ml cartridge along with the 10ml bottle from the vape pen device.
- The Cleanser: Using a clean dry cotton swab, scrub the insides of the battery compartment. It is okay to find some water drops in the gold connector since there was already 12ml of liquid that passed through. Cleaning will help keep your 10,000 puffs effective.
Step 2: Packing Your New Pod
Unpack a brand-new IVG Pro 12 Refill Pack. Inside you will get a new 2ml cartridge along with a new 10ml container to fill it with your juice. Remember to always change both at once.
Step 3: Repeat the Activation
Follow the "Lock and Click" process from Phase 1 and most importantly wait another 10 minutes for the new coil to prime.
The Expert’s Corner: Pro-Level Maintenance
Advanced Maintenance: Performance Optimization
The "Tilt" Technique
If you feel the flavor is weakening but you can see liquid in the 10ml bottle, the pod might need a manual top-up.
- The Fix: Tilt the IVG Pro 12 Prefilled Pods upside down for a few seconds. This helps the vacuum system pull liquid from the reservoir into the 2ml heating chamber.
Spit-Back Prevention
With such a large liquid capacity, occasionally vapor can condense in the mouthpiece.
- The Fix: If you experience "spit-back," roll a tiny piece of tissue into a needle shape. Just gently swab the inside of the mouthpiece to clear the excess moisture.
Battery & Charging Pro-Tips
The IVG Pro battery features a rechargeable power to last through all 10,000 puffs.
- Avoid Fast Chargers: Stick to a 1A wall plug or a laptop USB port for IVG Pro 12 boost mode. "Superchargers" for phones can cause the small battery to overheat.
- Don't Overcharge: Unplug it when fully charged. Charging it continuously at 100% while connected to the charger may impair its ability to properly fire the mesh coil.
Final Word: The "Closed System" Rule
The IVG Pro 12 Prefilled Pod Kits is a closed system designed for safety and flavor consistency. How to refill IVG Pro? Do not attempt to manually refill the 10ml bottle with other e-liquids.
The internal seals are designed for a single use; prying them open will cause leaking and potentially destroy the battery. IVG Pro vape price is very affordable and this is what makes it convenient.
When the 10,000 puffs are up, recycle your components responsibly and click in a fresh IVG Pro 12 flavor!
Frequently Asked Question
Q: What are IVG Pro refill pods?
A: The IVG Pro refill kit is a powerful "Big Puff" vape that combines a specially designed 2ml mesh coil pod and a separate 10ml refillable tank, thereby remaining compliant with TPD and providing the performance of a large vaping device without having to replace any equipment frequently.
Q: Are IVG Pro refill pods compatible with all IVG devices?
A: No. These pods are precision-engineered exclusively for the IVG Pro 12 and Pro series chassis. Because they utilize a specific "lock-and-click" connection to interface with the 10ml refill container, they will not fit into standard IVG disposable kits, the IVG 2400, or other closed pod systems.
Q: How much e-liquid does each pod system hold?
A: Each complete setup provides a total of 12ml of premium e-liquid. This is split between a 2ml internal chamber (housed in the pod) and a 10ml external refill container. In total, they provide enough liquid for 10,000 puffs or, in other words, the same amount as 16 normal 600 puff disposables.
Q: Do IVG Pro refill pods use mesh coil technology?
A: Yes. Each IVG Pro pod has an advanced mesh coil that comes built-in. The benefit of using a mesh coil instead of a wire coil is that it has a bigger heating surface, which translates to improved flavor, quicker heating time, and better vapor production quality that remains the same throughout the vaping experience, right up to the 10,000th puff.
Q: Are IVG Pro refill pods suitable for Mouth-to-Lung (MTL) vaping?
A: Definitely. They have been carefully designed to offer the smoker a tighter hit similar to a cigarette. Combined with the smooth nicotine salt by IVG, these pods can give you that perfect throat hit without any messy vapor cloud.
Q: What nicotine strengths are available?
A: Depending on how far along you are in your vaping process, these pods usually come in 20mg, 10mg, and 0mg strengths (good for former smokers). Notice: Availability may vary per flavor; please check current stock for confirmation.
Q: Can IVG Pro refill pods be manually refilled?
A: No, these pods are meant for closed system use only. Since the refill pod is sealed inside the outer case to create a vacuum, the pods are not meant to be opened. They should remain sealed at all times to ensure that there is no leaking whatsoever.
Q: How long does one IVG Pro refill pod last?
A: The period will vary based on your individual usage. The typical light user will make the 12ml pod last up to 5-7 days. The average moderate vaper is likely to have 3-4 days of vaping with one pod. While for the hard-core, chain-vaping "chonker," it should be good for 1-2 days.
Q: How do I know when the pod needs replacing?
A: You will get three clues about it:
- Dull Flavor: This usually means the taste is becoming muted or peppery.
- Lower Vapor Production: You will feel like you have to draw harder to get that cloud.
- The Dry Hit: This will give you a burnt feeling, meaning that your 10ml fluid is used up and the wick is starting to burn.
