How to Replace Vapes Bars Angel 20K Prefilled Pods? Step by step Guide
The Vapes bar Angel 20K Prefilled Pods is a standout in the vaping world, offering a massive 20,000-puff capacity through a clever dual-pod system. Because it uses a unique "pod + refill container" design to stay within legal regulations while providing maximum longevity, the initial setup is a bit different from your standard prefilled vape.
Whether you are unboxing a brand-new kit or swapping out old pods for fresh ones, this guide will walk you through everything you need to know.
How to Set Up and Use Your Angel 20K Prefilled Pods
In case you’ve just gotten hold of the Angel 20k prefilled pods wholesale, here’s how you can set it up correctly from the very start.
Step 1: Unpack and Examine
Begin by taking out the Angel 20K from the box. You need to make sure that the product is thoroughly cleaned and that there are no more protective stickers/silicone seals on the mouthpiece or on its base. It may be beneficial to also look inside the charging port.
Step 2: Prepare Your Refill Containers
Included in the package will be 10ml refill containers.
- Squeeze the button found on the top of the cap of the 10ml refill container.
- Make sure that there are no internal seals remaining on the nozzle. These bottles are pressurized to preserve the liquid, so extra caution should be observed when opening the container.
Step 3: Connect Your Pod Units
Each flavor will have a two-piece unit: 2ml pod + 10ml refill container.
- Take a single 2ml pod and fit it on top of a 10ml refill container.
- Move the pod down and insert it until it clicks firmly.
- Rinse and repeat for another unit so you have two assembled pod units.
Step 4: Insert into the Device
- Pull the large mouthpiece cap off the device.
- Slot the two assembled units into the device side-by-side.
- Snap the mouthpiece back on firmly. The magnets or clips should hold everything tight so there is no rattling while you carry it.
Step 5: The "10-Second Flip" (Crucial Step!)
In order to avoid receiving a “dry hit” (bitter taste), it is important that you prime your mesh coil.
- The entire apparatus should be flipped upside down for around 10 seconds. This helps in filling the 2ml pod with the liquid from the 10ml bottle.
- After leaving it upright for one minute, you are good to go with your very first hit.
Step 6: Switching Flavors
The Angel 20K Prefilled Pods is draw-activated—just inhale to vape. To change between the two flavors:
- Lift the mouthpiece slightly and rotate it 180 degrees.
- This aligns the airflow with the other pod, allowing you to swap tastes instantly. It is a great way to avoid "vaper's tongue" by switching between a sweet and a minty flavor.
How to Replace the Angel 20K Prefilled Pods
When your vapor starts to taste burnt or the liquid windows look empty, it’s time for a replacement of Angel 20000 vape pods refill 3 for 15.
Step 1: Remove the Mouthpiece and Old Pods
Begin by removing the mouthpiece cap of the Angel 20K. Inside, there are two slot compartments for the pod assembly that should be removed and discarded.
Step 2: Prepare the 10 ml Refills
Retrieve your two new 10 ml refills. Notice the button found near the cap on the 10 ml refill.
- Press the button to unlock the safety cap.
- Ensure that there are no silicone plugs and/or stickers found at the top of the container, and discard them.
Step 3: Prepare the 2ml Pods
Retrieve the 2 ml pods, which usually have silicone caps at the mouth and bottom of the pod as protection against leaks while being transported.
- Remove the silicone mouth plug.
- Take away the seals/stickers at the bottom of the 2 ml pod to enable attachment to the battery.
Step 4: Attach the Pod to the Container
This is the critical step of attaching the 2 ml pods to the 10 ml containers.
- Fix the bottom part of the 2 ml pod to the top of the 10 ml refill container.
- Snap them tightly together until they lock into place.
- Repeat this procedure for the second pair.
Step 5: Insert into the Device
Slide both assembled units into the body of the Angel 20k prefilled pods near me. They should sit side-by-side. Once they are in, snap the large outer mouthpiece/lid back onto the top of the device until it clicks.
6: The "10-Second Flip" (Crucial Step!)
To ensure you don’t get a "dry hit" (that burnt taste), you need to prime the coil.
- Turn the entire device upside down and hold it for about 10 seconds.
- It enables the e-liquid in the 10ml bottle to move into the 2ml pod and wet the mesh coil.
- Let the device sit upright for a minute before taking your first puff.
How to Switch Between Flavours
One of the best features of the Angel 20K is the dual-flavour system. You don’t need to take the Angel 20k Prefilled Pod Kits cheap apart to change tastes.
- Lift & Twist: All you have to do is simply lift the mouthpiece just a bit and twist it by 180 degrees.
- The alignment of the air: This intake will now make you switch between “Blue Razz” flavor and “Fresh Mint” within seconds.
Quick Troubleshooting & Tips
- Monitor Your Screen: This device comes with its own display screen. Make sure you keep track of your battery life.
- Charging: Use the USB-C port at the base. To protect the battery life, try to unplug it once it reaches 100% rather than leaving it on charge overnight.
- No Vapor? Ensure the pods are pushed all the way down into the device. If the pods aren't making contact with the gold pins at the bottom, the device won't fire.
- Leaking? Ensure that the 2ml pod and 10ml bottle are firmly locked together. If there’s any leakage, then chances are you’re leaving gaps which prevent the vacuum seal from forming correctly.
Through following these simple tips, you can maximize on the flavors and longevity of the Vapes Bars Angel 20K.
Final Word: The closed window
The Angel 20K Prefilled Pods represents one of the most amazing breakthroughs in the vaping industry. Angel 20k prefilled pods amazon combines the portability of vapes with the strength of a pod kit.
With correct installation of the pod and the “10 second flip,” you will always get a perfect vaping experience without any issues.
Frequently Asked Questions
Q: How many puffs does the Angel 20000 provide?
A: The Angel 20K offers up to 20,000 puffs in total (about 10,000 puffs per flavor side). This makes it a more durable product compared to regular vape devices.
Q: Is the Angel 20K vape legal and TPD compliant in the UK?
A: Yes. The Angel 20K uses 2ml pods that are connected internally to refill containers, which makes it both legal and TPD-compliant.
Q: How do I refill or replace the pods?
A: The Angel 20K features prefilled pods that are made to be changed once emptied, not manually refilled using bottled e-juice.
Q: How long does the 850mAh battery last?
A: On average, the battery should last all day. Its capacity can be replenished in about 45-60 minutes via a regular USB-C cable.
Q: What is the nicotine strength?
A: Nicotine salts of 20mg/ml (2%) are present inside each cartridge for providing a smooth throat hit and quick satisfaction.
Q: Does it have a screen?
A: Yes, there is a smart LED screen that lets you monitor the remaining battery and number of puffs in real-time.
