How to Replace IVG SAVR Prefilled Pods? A Step-by-Step Guide
The IVG SAVR Prefilled Pod is a modern solution for those looking to move away from standard 600-puff toward a more sustainable, high-capacity system.
Offering up to 3,000 puffs, IVG SAVR Refill combines a sleek, rechargeable design with the premium nicotine salts IVG is famous for.
Because the SAVR uses a unique "2ml pod + 4ml refill" system to stay TPD-compliant while offering 6ml of total e-liquid, the initial setup is key to a good experience. Here is everything you need to know to get started or replace your pods like a pro.
How to Use Your IVG SAVR Prefilled Pods
The IVG SAVR pods is designed for simplicity, but there is a specific order to clicking the parts together to ensure the auto-refill system works.
Step 1: Unbox and Remove Protectors
Open your starter kit or replacement pack. You will have the IVG SAVR battery, a 2ml prefilled pod (the mouthpiece part), and a 4ml refill container.
- Mouthpiece Cap: Remove the cap from the mouthpiece by pressing and pulling it down.
- Stoppers & Stickers: Remove the internal silicone stoppers and peel off any red stickers and rubber seals from the bottom of the pod and refill container.
Step 2: Assemble the Pod and Container
It is at this point that you will get your 3,000 puffs.
- Take the 2ml pod and align it with the 4ml refill container.
- Couple them together tightly such that a clear "click" sound is made. This ensures that they open up the valve that allows for e-liquid to be transferred from the tank into the pod during vaping.
Step 3: Insert into the Device
The assembled component must fit into the SAVR battery device. It should sit perfectly in place. Replace the outer case of the battery if you opened it during assembly.
Step 4: Prime and Vape
The IVG SAVR 3000 Refill is draw-activated, meaning there are no buttons.
- Once assembled, let the device sit upright for 1–2 minutes to ensure the mesh coil is fully saturated.
- Simply inhale through the mouthpiece to start vaping.
How to Replace Your IVG SAVR Prefilled Pods
When your device begins to produce less vapor, or if the flavor starts to lose its punch, it is time to refresh your setup. Because the IVG SAVR Kit uses a unique modular design, replacing the pods is slightly different than a standard plug-and-play system. For an easy switch-over, follow these additional instructions for IVG SAVR Prefilled Pods:
Step 1: Remove the Used Pod Assembly
IVG Pro how to remove pod? Start by separating the mouthpiece from the battery housing. Because the 2ml pod and 4ml tank are inseparable, they will separate together.
Inspect the battery’s terminal area for signs of moisture and dust. Clean it using a dry cotton bud. This step guarantees the ideal electrical connection between the new pod and the battery.
Step 2: Disassembling and Assembling the New Set
Take a box of IVG SAVR Replacement Pods out of the wrapper. Notice how the replacement set is kept in two parts to preserve its freshness.
- Disassemble the plug: The pod consists of two parts – the mouthpiece and the tank. The mouthpiece has a “tail” made of silicone, while the tank has a sticker. Remove them carefully.
- Positioning: Look for arrows on both parts and line up the arrows on the 2ml pod and 4ml tank.
Step 3: The "Snap-Lock" Connection
Put the 2ml pod on the 4ml refill bottle and press it firmly until you hear a strong clicking noise. The noise is important; it shows that the seal inside the pod is punctured, and the 4ml of additional e-liquid begins to be poured into the 2ml coil tank.
Without the click, the pod will become dry very soon since the refill bottle has not been "unlocked."
Step 4: Priming for Maximum Flavor
Once the two parts are clicked together and slid into the battery, do not vape immediately.
- The Wait Time: Give the IVG SAVR vape at least 2 to 3 minutes to sit upright.
- The Benefit: It makes possible for the vacuum system to draw the new Nic Salt e-liquid into the mesh coil. Neglecting this brief pause may cause you to have a "dry hit," which burns the cotton and destroys the taste of your fresh pod.
Step 5: Responsible Disposal
Because the SAVR system helps reduce battery waste by being rechargeable, you are only disposing of the plastic and coil components.
However, since these pods contain traces of nicotine and electronic heating elements, please do not throw them in your household bin. Dispose of your spent pods in a vape store or special facility for electronic waste.
Quick Troubleshooting and Tips
Is your IVG SAVR leaking from the bottom? Here are some additional troubleshooting tips;
- Flavorless or Burnt: Make sure that you have clicked the pod and the container together. If not, the 2ml pod will not refill, and the coil will dry up.
- Lights: The SAVR adopts the traffic light concept. When the green light is on, it is fully charged, amber is medium, while red indicates charging is needed.
- Problems with Airflow: Make sure there are no stickers from the package stuck at the bottom of the pod or the air holes of the side.
Final Word: The Closed Window
In conclusion, the IVG SAVR Prefilled Pod Kits offers a great balance between convenience and strength in vaping for users of both vapes and pod kits.
Assembling it requires only a single click, and the 30 available flavors make it a good daily companion. Remember to click, wait a minute, and enjoy your 3,000 puffs!
Frequently Asked Questions
Q: How many puffs does the IVG SAVR provide?
A: The IVG SAVR comes equipped with 3,000 puffs per set of pods. In other words, it gives about five times more compared to a normal vape that typically offers 600 puffs. All thanks to the 2ml pod that gets automatically replenished with the help of the 4ml tank.
Q: Is the IVG SAVR legal and TPD compliant in the UK?
A: Absolutely! This product is totally safe and TPD-approved. With its 2ml prefilled pod plus 4ml e-juice bottle, it ensures that 6ml of e-liquid is delivered without exceeding 2ml allowed per one vape tank in the UK. This ingenious solution complies with all existing regulations of the UK authorities.
Q: How do I know when to replace the pods?
A: It will be clear to you when the taste becomes somewhat dull or you start experiencing any burning on your tongue, which means that there is no e-liquid left to use. The clarity of the pod allows you to keep track of the liquid level. Replace everything once it runs out.
Q: What is the nicotine strength?
A: Each IVG SAVR pod is packed with a 20mg/ml (2%) nicotine salt liquid. Such a combination will bring you excellent smoothness when inhaling and quick absorption of nicotine into your system. It will make this product ideal for switching from cigarettes.
Q: Is the battery rechargeable?
A: Yes, there is a built-in rechargeable 650mAh battery that works through a USB-C port. It means you will be able to use this device several times until its battery dies and replace only pod units. It is environmentally friendly compared to discarding batteries after 600 puffs.
Q: Does it use a mesh coil?
A: Yes, each pod includes a 1.1Ω mesh coil for optimal performance. Thanks to a mesh coil, you can enjoy the full taste of e-liquid due to increased surface area. The same pleasure starts from the first puff and ends after the 3,000th one.
